Sink unit 120 ZINC

Frame, sides, doors & drawers : solid mango wood
Back, shelves & drawer bottoms : plywood
Top : MDF & plywood covered with galvanized metal.
Lightly stained in white and grey
Shell drawer pulls & knobs : patinated iron
Ceramic sink.
Sink dimensions : 54x38x17cm.
Taps not supplied. Tip : Drill a hole in the work surface at the rear of the sink to insert the taps (hole Ø4 cm).
Basin plug not supplied. Tip : A Ø60 mm basin plug is required for ceramic or composite sinks.
Top drawers : wood sliders. Maximum load: 5kg.
1 removable shelf behind right door and another one behind left door. Maximum load : 15kg.
The central part is open at the back for installing the plumbing.
This unit supports a maximum load on the counter of 30kg.
Adjustable legs.



General :
Each element in this kitchen is independent.
The zinc counters are fastened to each element.
The units are not designed to house hotplates.
Adjustable moulding to be installed according to your wishes.
Thickness of zinc counter : 3 cm.



Maintenance instructions :
Zinc is a material which ages and becomes polished over time. Subject to damage from scratching, water stains and finger marks, as well as by certain “acid” foods (vinegar, lemon, etc. ), it requires constant upkeep. We recommend that you avoid allowing water to lie on the work surface, that you wipe it with a soft cloth after using, and that you use a trivet. Stain-resistant coating on the facades. Clean with a slightly damp sponge and wipe with a soft, dry cloth.